TSL | Content \ General \ TSL

JS: Sept 2017 Author

Description:

tsl is the abbreviation for Tool Script Language and is a programming language.
With the help of this programming language, you can program dynamic connection/tools (e.g. metal parts) and other dynamic applications.
When our standard tsl's are updated this will be updated in the hsbContentDutch.

Location:

These are saved in your C:\Program Files\hsbcad\hsbcad20..\Content\General.

Explanation:

The General tsl's are available for all hsbcad user's.

TSL | Content \ Dutch \ TSL \ (D)imensioning

TSL | Content \ Dutch \ TSL \ (E)Element
TSL | Content \ Dutch \ TSL \ (F)loor

TSL | Content \ Dutch \ TSL \ (G)General

TSL | Content \ Dutch \ TSL \ (I)nformation

TSL | Content \ Dutch \ TSL \ (L)og

TSL | Content \ Dutch \ TSL \ (P)anel-CLT
 
TSL | Content \ Dutch \ TSL \ (R)oof

TSL | Content \ Dutch \ TSL \ (S)ip

TSL | Content \ Dutch \ TSL \ (T)imber

TSL | Content \ Dutch \ TSL \ (W)all

TSL | Content \ General \ TSL

_hsbReport: This tsl generates a Bill of material report definition of the hsbExcelReport Designer.
bodyImporter: This tsl ...
CNC_DrillElement: This tsl drills holes in an Element. Only for Roof Elements.
hsb_CommentManagement:This tsl ...
HSB_D-Element: This tsl places dimension lines around an element. Several parts of the element can be dimensioned.
hsb_DrawMultiElement: This tsl ...
HSB_E-NailClusters: This tsl creates nail clusters to nail one zone on anther zone. The nail clusters are centered, with the specified offsets, in the intersecting areas between the 2 zones.
HSB_E-SetDrillVisualizationType: This tsl visualizes the tsl ''CNC_DrillElement" in an Element.
hsb_ExportRunner: This tsl runs exports.
hsb_G-BlockReader: This tsl ...
hsb_G-FilterGenBeams: This tsl ...
hsb_InventoryDB: This tsl ...
hsb_MultiWallDraw: This tsl refresh or Delete multiwalls from the model.
hsb_MultiWallManager: This tsl calls a dll that trigger the multiwall composer and set the multiwall information in every single wall.
hsb_MultiWallRemoveElement: This tsl ...
hsb_RunValidations: This tsl runs validations from the model.
hsb_SIP-SetPanelMaterial: This tsl set's the material of the SIPs inside a wall
hsb_SIP-SetSizeConvention: This tsl corrects the width and height convetion of timbers generation.
hsb_ValidationInspector: This tsl is a tool to run a set of tests specified inside a validation group.
hsb_ValidationManager: This tsl can be used to define groups of validation tests.  
hsbBeamcut: This tsl creates a beamcut on one face of a beam. ???
hsbBlocking: This tsl creates blockings in dependency of walls or plates and selected rafters as well as blocking grooves.
hsbCenterOfGravity: This tsl calculates the center of the element. 
hsbCLT-Chamfer:This tsl defines a polyline based tool for chamfers.
hsbCLT-CNC-Curves:This tsl ....
hsbCLT-CNC-Drill:This tsl ....
hsbCLT-Dovetail: This tsl defines a dove tail connection or a butterfly spline on an edge between at least two panels.
hsbCLT-Dovetail-G: This tsl defines a dove tail connection or a butterfly spline as G-Connection (Mitre) between at least two panels.
hsbCLT-Dovetail-T: This tsl defines a rabbet / tenon joint between T-connected panels.
hsbCLT-Electra: This tsl will add Electricity to a Panel Wall.
hsbCLT-ElementSplit: This tsl defines a split location on a wall element.
hsbCLTJointBoard: This tsl creates a joint board between 2 panels.
hsbCLT-JointBoard: This tsl defines a joint board connection on one common edge between at least two panels. 
hsbCLT-LapJoint: This tsl defines a lap joint on one edge between at least two panels.
hsbCLT-Lift: This tsl will create drills for the lifting device.
hsbCLT-Lifter: This tsl will create drills for the lifting device.
hsbCLT-OpeningRebate: This tsl creates a single or double rebate around an opening. It can be attached to any opening or the minmal size can be filtered during insert.
hsbCLT-OpeningSplit: This tsl splits panels at an opening and extents the header panel by the given value.
hsbCLT-Pocket: This tsl creates a pocket (mortise) with an optional explicit radius rounding on one face of one or multiple coplanar panels.
hsbCLT-PropellerTool: This tsl
hsbCLT-Rabbet: This tsl defines a rabbet / tenon joint between T-connected panels.
hsbCLT-ReliefCut: This tsl
hsbCLT-SetProperties: This tsl add's properties to panels.
hsbCLT-TongueGroove: This tsl creates a tongue groove in the CLT panels.
hsbCLT-X-Fix-Connector: This tsl creates X-Fix connectors between panels.
hsbCNC: This tsl creates a saw or milling line or a no nail area of a zone of an element.
hsbCNC-Drill: This tsl creates a saw or milling line or a no nail area of a zone of an element
hsb-Connections: This tsl ...
hsbCreateElement: This tsl creates an element of type ElementRoof and assigns entities to detected zones.
hsbDovetail: This tsl creates dove tail connections in various alignments.
hsbEntityTag: This tsl ....
hsbGrainDirection: This tsl will put the grain direction on the panel.
hsbGroupVisibilityOff: This tsl turns all groups of the selected elements off. ???
hsbLayout-ElementLevelMarker: This tsl ...
hsbLayout-MultiElementDescription: This tsl ....
hsbLayoutTag: This tsl creates collision free tags in paperspace, looking to modelspace entities
hsbMultiLanguage: This tsl stores up to 2 alternative languages in the autocad database to be used for special shopdrawings etc.
hsbPanelDrill: This tsl will drill a hole a panels.
hsbPolylineBeamcut: This tsl creates segemented beamcuts along a polyline.
hsbPolylineBeamDistribution: This tsl ....
hsbPolylineTool: This tsl creates segemented beamcuts along a polyline.
hsbProfileConnection: This tsl creates a cut along a Profiled beam.
hsbPurgeBeamcuts: This tsl ...
hsbRoofData: This tsl ...
hsbRoofDataEdge: This tsl ...
hsbScarfJoint: This tsl creates a single or double scarf joint on multiple beams
hsbSlottedHole: This tsl ...
hsbSolid2PanelConversion: This TSL converts solids into hsbPanels under respect of typical CLT requirements.
hsb-SteelTool: This tsl ...
hsbSwapGenbeamProperties: This tsl ...
hsbT-Connection: This tsl ...
hsbT-HalfCutMarking: This tsl ...
hsbTirolerSchloss: This tsl ...
hsbT-Marking: This tsl creates marker lines for a t-connection.
hsbTSL ECS Symbol: This tsl ...
hsbTslSettingsIO: This tsl ...
hsbToolReport: This tsl ...???
hsbTranslatedText: This tsl translates the given string into the current language if the text in embraced with vertikal pipes''.???
Offsetted_Parallel_Housing: This tsl ...
Pitzl HVP: This tsl ...
Pitzl Pfostenträger: This tsl ...
Pitzl SPP-Verbinder: This tsl ...
Rothoblaas Disc: This tsl ...
Rothoblaas Titan: This tsl ...
Rothoblaas Typ F70: This tsl ...
Rothoblaas Typ R: This tsl creates Rothoblaas post bases type R on one or multiple beams.
Rothoblaas Typ X: This tsl creates Rothoblaas post bases type X on one or multiple beams.
Rothoblaas WHT: This tsl inserts a Rothoblaas WHT anchor at StickFrame Walls, panels or beams.
Rothoblaas XYLOFON: This tsl creates Rothoblaas XYLOFON noise absorbers at panel edges or edges, resulting from throughout beamcuts
sdMS_Pitch: This tsl ...
sdMS_ShopDrawDetailView: This tsl ...
Sherpa: This tsl creates Sherpa connectors between two beams.
Sihga PICK Element: This tsl creates SIHGA PICK lifting devices in Roof/Floor Elements, referring to the center of gravity.
Sihga PICK Wall: This tsl creates SIHGA PICK lifting devices in Stickframe Walls, referring to it's center of gravity.
Simpson StrongTie BT: This tsl creates a Simpson StrongTie connector of BT families.

_hsbReport

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl generates a Bill of material report definition of the hsbExcelReport Designer.  This TSL can be used in the model area, in a single drawing or in the element layout.

 

Insert: Manual insert

This tsl has to be inserted in Model space.
First select the report name and confirm with OK.
Select a partial report and all other properties.
Alternatively, the display of the suitability dialog can be skipped by entering a catalog entry.
Example: ^ C ^ C (hsb_scriptinsert "hsbReport" "Element") uses the catalog entry 'element'
The report definition used can also be changed subsequently using a context command.  

Remarks:

These report are situated in your hsbCompany\Excel folder

Work flow:




bodyImporter

(Back to top)

Location:

These are saved in your C:\Program Files\hsbcad\hsbcad20....\Content\General\TSL.

Description:


This tsl ....
 

Insert:

Remarks:

Work flow:



CNC_DrillElement

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl drills holes in an Element.
Only for Roof Elements.


Insert:

Created if Drill in Timber, Drill Next to Timber 

Remarks:

Is used in DSP, TSL is created with default values 
Use hsb_E-SetDrillVisualizationType to change drill in symbol

Work flow:



hsb_CommentManagement

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl....

Insert: Manual insert

This tsl has to be added in Model space. 

Remarks:

Work flow:

General:
- Action: 



hsb_D-Element

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL\(D)imensioning   
This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl is one of the main tsl's that is used to dimension the automatic wall-Roof-Floor layouts and Shop drawings. This tsl places dimension lines around an element. Several parts of the element can be dimensioned. 


Insert: Manual insert

This tsl has to be added to a viewport (Paperspace) or a shop draw view.

Remarks:

There are custom actions (right mouse click) available to hide the dimension line for a particular element.

Work flow:

- General:
- Filter:
- Dimension Object:
- Positioning:
- Style:
- Reference:
- Name and description:

Dimensioning with beamcode.

 

Dimensioning with Label



hsb_DrawMultiElement

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added to a viewport (Paperspace).

Remarks:

Work flow:

General:
- Vertical offset between panels
- Horizontal offset between panels
- Dimension Style
- Text height
- Text color




HSB_E-NailClusters

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl creates nail clusters to nail one zone on anther zone.
The nail clusters are centered, with the specified offsets, in the intersecting areas between the 2 zones.
 

Insert: Manual insert

This tsl has to be added in Model space.
Insert the tsl, select elements  

Remarks:

Now it has a property that is set to NO as default, so it maintains the same behavior as before, but if you choose YES to “Add nails to the area extreme points” then based on the valid area you will get the number of nails that you pick… if there is one nail it will use the reference point (average of all the vertices), if there are two nails it will find the extreme points of the valid are and add a nail there.     

Work flow:

Object to nail:
- Filter sheets with label
- Zone to nail
- Zone to nail on
Nail settings:
- Number of nails: Sets the number of nails.
- Tool index: Sets the tool index.
- Vertical offset: Set the vertical offset from the center of the nail area.
- Horizontal offset: Set the horizontal offset from the center of the nail area.
- Minimum distance to sheet edge: Set the minimum required distance to the edge of the sheets in the specified zones.
- Add nails to the area extreme points: It will add nails to the extreme points of the valid area, ignoring the vertical and horizontal offset only when they go out of the bounderies.

 


hsb_E-SetDrillVisualizationType

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL 

Description:


This tsl visualizes the tsl ''CNC_DrillElement" in an Element.
Only for Roof Elements.

 

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:

Selection:
- Include/Exclude
- Filter beams with beamcode
- Filter object with material
- Filter objects hsb id
Drill:
-  Scriptname drill tsl
- Visualization Type
General:
- Delete TSLs that don't match filter's



hsb_ExportRunner

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl runs exports.

Insert: Manual insert

This tsl has to be inserted in Model space.

Remarks:

This can also be done by the hsbExporter

hsb_G-BlockReader

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General.

Description:

This tsl ...

Insert: Manual insert

This tsl has to be inserted in Model space.

Remarks:

Work flow:



hsb_G-FilterGenBeams

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ...

Insert: Manual insert

This tsl has to be inserted in Model space.

Remarks:

Work flow:



hsb_InventoryDB

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be inserted in Model space.   

Remarks:

Work flow:



hsb_MultiWallDraw

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl Refresh or Delete multiwalls from the model.

Insert: Manual insert

This tsl has to be inserted in Model space.   

Remarks:

Work flow:





hsb_MultiWallManager

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl calls a dll that trigger the multiwall composer and set the multiwall information in every single wall. 
Groups that start with MW_ will be display.

Insert: Manual insert

This tsl has to be inserted in Model space.   

Remarks:

Work flow:

General:
- Export Group




hsb_MultiWallRemoveElement

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be inserted in Model space.
Insert the tsl, select one or more Elements. 

Remarks:


Work flow:



hsb_RunValidations

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl runs validations from the model.


Insert: Manual insert
This tsl has to be inserted in Model space.  

Remarks:


Work flow:

General:
- Test group
- Dimension style




hsb_SIP-SetPanelMaterial

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl set's the material of the SIPs inside a wall.


Insert: Manual insert

This tsl has to be inserted in Model space.  

Remarks:

Work flow:

General:
- Material Name
  



hsb_SIP-SetSizeConvention

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl corrects the width and height convetion of timbers generation.

Insert: Manual insert

This tsl has to be inserted in Model space.
Insert the tsl, select an Element.

Remarks:

Work flow:


hsb_Validation Inspector

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:

The validation inspector is a tool to run a set of tests specified inside a validation group.
For more information Go to: hsb_Validation Inspector

Remarks:

Work flow:



hsb_Validation Manager

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:

The validation manager can be used to define groups of validation tests.
For more information Go to: hsb_Validation Manager

Remarks:

Work flow:




hsbBeamcut

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General??? 

Description:


This tsl creates a beamcut on one face of a beam.

 

Insert: Manual insert

This tsl has to be inserted in Model space.
Insert the tsl,

Remarks:

Work flow:

Geometry
- Length: Defines the Length 0 = full length
- Width: Defines the Width 0 = complete
- Height: Defines the Height
Aligment
- Offset: Defines the Offset Use '+' or '-' to align to an edge, enter a value to specify offset from axis
- Reference Side: Defines the Reference Side
    


hsbBlocking

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl creates blockings in dependency of walls or plates and selected rafters as well as blocking grooves.


Insert: Manual insert

This tsl has to be inserted in Model space.
Insert the tsl, select wall(s) or plate(s), select rafters.
A dialog box will open, enter the values, select OK.

Remarks:

Work flow:





hsbCenterOfGravity

(Back to top)

Location:

These are saved in your C:\Program Files\hsbcad\hsbcad20....>\Content\General\TSL.    

Description:

This tsl calculates the center of gravity of any hsbcad item, element or assembly.

This tsl works in combination with various tsls such as the hsb_G-Information and the hsb_W-Lifting 
Place the hsbCenterOfGravity tsl first. 


Insert: Manual insert

This tsl can be added in Model space or in Paper space.
Model space: select a set of entities.
Paper space: press enter, then select a view port and a insertion point outside of your paperspace

Properties:

Name

Value

Function

Symbol Size

Positive real number or zero

Controls symbol and text size

Color

A list of parameters

Parameters of the appearance of vertical stackings

Include Windows and doors

Yes/No

Specifies whether doors and windows should estimate their weight using the material definitions ‘Door’ and ‘Window’

Context Commands:

Name

Function

Add Entity

Adds an entity to the calculation

Remove Entity

Removes an entity to the calculation

Add material to database

Calls the dialog to add or edit entries in the material table

Show / Hide Dependencies

Draws/hides a line to all referenced entities

Remarks:

The tsl uses the densities which are assigned to a material in the material definition table.
To edit the material definition table double click on an instance of hsbCenterOfGravity or call the command in your hsbcad ribbon.
If a material cannot be found the default density of 500kg/m³ will be used.


Work flow:

This tsl can be used for all entities, walls/Roof and Floor elements.
If you select different walls/Roof and Floor elements the tsl places on each walls/Roof and Floor element the icon off its CenterOfGravity.
When you select only the material you can specify the CenterOfGravity off a complete Roof or total Walls.

Output:

If the tsl is attached to an element it will write the weight to the extended data of the entity.
This information can be accessed during output by using the property definition ExtendedProperties.Weight.
The formatting can be achieved by the standard formatting rules.
Example: @(ExtendedProperties.Weight:0)
The formatting instruction will read the weight of the entity and round to zero decimals.

Display:

The calculated weight cannot be displayed in OPM, but a resident instance of the tsl will display the weight at the point of gravity.
If the symbol size is set to zero in paperspace one can suppress the display of the instance.
The appearance of the symbol can be modified by a custom block, The block name needs to be identical to the TSL-Name.

Advanced TSL:

The snippet below maybe used by tsl authors to make use of the functionality as a helper method
     Map mapIO;
     Map mapEntities;
     mapEntities.appendEntity("Entity", ent); // append entities of calculation
     mapIO.setMap("Entity[]",mapEntities);
     TslInst().callMapIO("hsbCenterOfGravity", mapIO);
     Point3d ptCen = mapIO.getPoint3d("ptCen");// returning the center of gravity
     double dWeight= mapIO.getDouble("Weight");// returning the weight

hsbCLT-Chamfer

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:

This tsl defines a polyline based tool for chamfers.
The insertion Mode is Circumference (A1), by opening (A2), both(A3), by direction(A4), by polyline (A5), by path(A6). It allows you to choose the alignment, reference side (B1), opposite side (B2), or both (B3).



Insert: Manually insert
This tsl has to be added in Model space.
If needed, first draw a polyline on the panel,

Remarks:

Work flow:

General
- Insert Mode: Defines the Mode
- Aligment: Defines the Alignment
- Length: Enter the Length




hsbCLT-CNC-Curves

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:

This tsl ...

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbCLT-CNC-Drill

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:

This tsl ...

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbCLT-Dovetail

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL 

Description:


This tsl defines a dove tail connection or a butterfly spline on an edge between at least two panels. On insert it may create a split if only one panel was selected.
The closest point to the main contour in relation to the reference point defines the edge where the joint is. This tsl has to be added in Model space.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:

A : defines the width of the base of the dovetail
B : defines the depth of the base of the dovetail
C : defines the angle in the length of the dovetail
D : gap between the female and male part of the dovetail 
E : position from the axis
F : defines the offset from the bottom of the panel
G : selection dovetail or butterfly spline
E : creates a chamfer on the split of the panel 
F : creates a chamfer on the split of the panel  



hsbCLT-Dovetail-G

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:


This tsl defines a dove tail connection or a butterfly spline as G-Connection (Mitre) between at least two panels.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Identical use as hsbCLT-Dovetail

Work flow:



hsbCLT-Dovetail-T

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL 

Description:


This tsl defines a rabbet / tenon joint between T-connected panels, The tool stretches the closest edge(s) to the designated plane.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Identical use as hsbCLT-Dovetail   

Work flow:




hsbCLT-Electra

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:


This tsl will add Electricity to a Panel Wall.
This tsl replaces the hsbPanelElectra tsl.
This tsl creates tools of electrical installations on panels.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

There are also other Electricity tsl's hsb_P-Electrical (Replaced)/ hsb_P-InstallationPoint / hsbCLT-Electra / hsbPanelElectra (Replaced)


Work flow:




hsbCLT-ElementSplit

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL  

Description:


This tsl defines a split location on a wall element.


Insert: Manually insert

This tsl has to be added in Model space.
Select one or more elements.

Remarks:

Work flow:



hsbCLTJointBoard

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL  

Description:


This tsl creates a joint board between 2 panels and determine the placement of the board.


Insert: Manually insert

This tsl has to be added in Model space.
Select a set of panels.
The tsl will create multiple joint boards for any two collinear edges of two panels. (or points) lying in the same straight line.
The selected surface needs to be coplanar (In the same plane).
The tool is dependent from the Joint Board (the beam which is created)

Remarks:

Work flow:





hsbCLT-JointBoard

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL  

Description:


This tsl defines a joint board connection on one common edge between at least two panels.
On insert it may create a split if only one panel was selected.


Insert: Manually insert

This tsl has to be added in Model space.
Select a set of panels.
The tsl will create multiple joint boards for any two collinear edges of two panels. (or points) lying in the same straight line.
The selected surface needs to be coplanar (In the same plane).
The tool is dependent from the Joint Board (the beam which is created)

Remarks:

Work flow:




hsbCLT-LapJoint

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL  

Description:


This tsl defines a lap joint on one edge between at least two panels. On insert it may create a split if only one panel was selected.The closest point to the main contour in relation to the reference point defines the edge where the lap joint is.


Insert: Manually insert

This tsl has to be added in Model space.
Select a set of panels.

Remarks:

Work flow:



hsbCLT-Lift

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL   

Description:


This tsl will create drills for the lifting device.

 

Insert: Manually insert

This tsl has to be added in Model space.
Select the CLT panels, the drills will be automatically placed according to what you've fill in the dialog box.

Remarks:

There are also other Lifting tsl's hsbCLT-Lift and hsbPanelLiftingDevice

Work flow:





hsbCLT-Lifter

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:


This tsl will create drills for the lifting device.

Insert: Manually insert

This tsl has to be added in Model space.
Select the CLT panels, the drills will be automatically placed according to what you've fill in the dialog box.

Remarks:

There are also other Lifting tsl's hsbCLT-Lift and hsbPanelLiftingDevice  

Work flow:





hsbCLT-OpeningRebate

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates a single or double rebate around an opening. It can be attached to any opening or the minmal size can be filtered during insert.
 

Insert: Manually insert

This tsl has to be added in Model space.
Insert the tsl, dialog box opens fill this in.

Remarks:


Work flow:





hsbCLT-OpeningSplit

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:


This tsl splits panels at an opening and extents the header panel by the given value.



Insert: Manually insert

This tsl has to be added in Model space.
Select the opening in the panels, the panel will be split at the opening and will extent the header panel by the given value.

Remarks:


Work flow:

General: Enter a value for the header.



hsbCLT-Pocket

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:

This tsl creates a pocket (mortise) with an optional explicit radius rounding on one face of one or multiple coplanar panels. During insert it filters redundant panels of the selection set. It (the standard rounding is only providing 2 radii).



Insert: Manual insert

This tsl has to be added in Model space.
Insert at location, select a set of panels.
Modify parameters or use context stretch command to align with other geometry.

Remarks:

The Alignment can be adjusted using properties or grips.
The dimension of the pocket can be adjusted using the properties or the appropriate context command.Doubleclick toggles between the face of the tool between the reference and the opposite side.
It requires hsbcad v21.3.1 or v22.0.32 or higher.

Work flow:




hsbCLT-PropellerTool

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbCLT-Rabbet

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:


This tsl defines a rabbet / tenon joint between T-connected panels.
The tool stretches the closest edge(s) to the designated plane.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:





hsbCLT-ReliefCut

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbCLT-Setproperties

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:


This tsl adds properties to panels

Insert: Manually insert

This tsl has to be added in Model space.


Remarks:

'---' resets the property to blank

Work flow:

General:




hsbCLT-TongueGroove

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates a tongue groove for CLT panels.


Insert: Manually insert

This tsl has to be added in Model space.
Select the CLT panel, select first split point and then select 2nd split point.

Remarks:

This tool requires proper definitions of the custom defined milling heads in HH2-Tab of hsbSettings.
- create the two parts of the tonguegroove in closed polylines.
- the top centerpoint of the closed polyline has to be the originpoint 0,0,0


Work flow:

A : reference side 
B : offset from the reference
C : offset between two panels 
D : distance between two tongues 
E : offset from the reference side
F : creates a chamfer on the split of the panel 
G : offset from the opposite side
H : creates a chamfer on the split of the panel  
I : base of the tongue       
J : depth of the tongue      




hsbCLT-X-Fix-Connector

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates X-Fix connectors between panels.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:

A : defines the type of connector
B : offset from top of panel
C : offset from bottom of panel
D : distance between the connectors, this will have an equal distribution of the connectors, closest to the interdistance.
E : position of the connectors on the inner our outer side of the panel
F : creates a chamfer on the split of the panel 
G :creates a chamfer on the split of the panel




hsbCNC

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates a saw or milling line or a no nail area of a zone of an element.

 

Insert: Manual insert

This tsl has to be added in Model space.
Insert the tsl, select a sheet of the desired zone, a dialog box will open and fill this in.

Remarks:

Work flow:




hsbCNC-Drill

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates a saw or milling line or a no nail area of a zone of an element.

 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:





hsb-Connections

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:

This tsl ....

 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:

General



hsbCreateElement 

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates an element of type ElementRoof and assigns entities to detected zones.
The user can specify a building and floor group as well as an optional prefix of the element number.
The tsl iterates through all selected beams, sheets and panels (genbeams) and sets zones based on the Z-location of the genbeam.
The coordinate system of the element is derived from the current UCS at time of insertion unless the appropriate option is selcted on insert (command line option).

 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:

Grouping




hsbDovetail

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates dove tail connections in various alignments.
It supports the common dove tool as well as a loose joinery connection.
With a given interdistance a duplex connection will be generated where ever applicable.

 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:

General



hsbEntityTag

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbGrainDirection

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:


This tsl will put the grain direction on the panel.
This tsl has replaced the old hsbPanelGrainDirection.

Defines the orientation of the top layer during production.
The dimension perpendicular to the grain direction specifies the max production width.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

To change the direction, right click and select ''Custom'' then select Rotate grain direction - Change grain direction.


Work flow:



hsbGroupVisibilityOff

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL ???

Description:


This tsl turns all groups of the selected elements off.

Insert: Manual insert

This tsl has to be added in Model space. Select element(s) and press OK

Remarks:

Work flow:



hsbLayout-ElementLevelMarker

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbLayout-MultiElementDescription

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl ....

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbLayoutTag

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates collision free tags in paperspace, looking to modelspace entities

Insert: Manual insert

This tsl has to be added in paper space. Select a viewport, select properties or catalog entry and press OK to place the instance next to a paperspace viewport.
Double click the instance of the TSL or right click/custom to select entities in modelspace.  To view the available entities right click the TSL instance and pick custom



If no format variables have been given yet, you can select from a list of available properties via right click custom menu

Remarks:

Properties of TSL are:
  • Format: Utilising the @ formatting allows the tag to be formatted with the parameters of the entity selected**. Some examples of these are:
Panel Style @(Style)
Beam number @(posnum)
Property set @(propertsetname.propertyname)

  • Dimstyle: set the style of the tag based on simstyle
  • Text Height: set the height of the text in the tag. This will over ride the height of the text in the dimstyle
  • Orientation: set the orientation of the tag relative to the entity selected. Three options, horizontal, vertical or aligned to entity
  • Style: Create a tag with/without leader, border or filled
  • Decimal places: Over rides the setting in the dimstyle to 
** A full set of formatted parameters can be sought by right click of TSL instance, custom and Set format Expression.  Type the associated number of the formatted variable as a shortcut to typing the full formatted variable name.

e.g. Selecting 19 will place @(grouplevel1) in the formatting




Further Information on formatting:

Defines the format of the composed value.
Samples
@(Label)@(SubLabel)
@(Label:L2) the first two characters of Label
@(Label:T1; the second part of Label if value is separated by blanks, i.e. 'EG AW 2' will return AW'
@(Width:RL1) |the rounded value of width with one decimal.
R |Right: Takes the specified number of characters from the right of the string.
L |Left: Takes the specified number of characters from the left of the string.
S |SubString: Given one number will take all characters starting at the position (zero based).
Given two numbers will start at the first number and take the second number of characters.
​Tokeniser: Returns the member of a delimited list using the specified index (zero based). A delimiter can be specified as an optional parameter with the default delimiter being the semcolon character.
Rounds a number. Specify the number of decimals to round to. Trailing zero's are removed.
​Round Local: Rounds a number using the local regional settings.


hsbModifyBeamProperties

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbMultiLanguage

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl stores up to 2 alternative languages in the autocad database to be used for special shopdrawings etc.

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbPanelDrill

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl ...
supports hsbCLT-EdgeDrill instances.
 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:




hsbPolylineBeamcut

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates segemented beamcuts along a polyline.

 

Insert: Manually insert

This tsl has to be added in Model space.
You need to draw a polyline first so this tsl can select it when inserted.
To insert the tsl, select the genbeam\Beam\Panel, then select the polyline.

Remarks:

Work flow:


hsbPolylineBeamDistribution

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl ...

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbPolylineTool

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL

Description:


This tsl creates segemented beamcuts along a polyline.



Insert: Manually insert

This tsl has to be added in Model space.
You need to draw a polyline first so this tsl can select it when inserted.
To insert the tsl, select the genbeam\Beam\Panel, then select the polyline.

Remarks:

Work flow:


hsbProfileConnection

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL
This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\IT\TSL  

Description:


This tsl creates a cut along a Profiled beam.

 

Insert: Manual insert

This tsl has to be added in Model space.
You need to draw a Profile and a hsbbeam perpendicular to the Profile beam.
To insert the tsl, select the male beam, then the Female beam.

Remarks:

Work flow:


hsbPurgeBeamcuts

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbRoofData

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbRoofDataEdge

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbScarfJoint

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl creates a single or double scarf joint on multiple beams.



Insert: Manual insert

This tsl has to be added in Model space.
Insert the tsl, select a beam(s), select the position.

Remarks:

When you select the tsl changes can be made in the Properties bar.

Work flow:

Tooling
- Type: Select the type of scarf joinery.
Geometry
- Length: The depth of the tool Absolute values or relative values to beam dimension supported, i.e. *0.25 for the value of 25% of the beam dimension
- Depth:
- Offset from Axis: Defines the vertical offset of the tool. (Simple Scarf only)
Drill
- Diameter: The diameter of the connecting drill
- X-Offset: The offset of the drill in length Absolute value or relative value to length of tool supported, i.e. *0.5 to place the drills with an offset of 50% of the tool length

hsbSlottedHole

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbSolid2PanelConversion

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsb-SteelTool

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbSwapGenbeamProperties

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbT-Connection

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbT-HalfCutMarking

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbTirolerSchloss

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ....

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbT-Marking

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl creates marker lines for a t-connection.
 

Insert: Manual insert

This tsl has to be added to a viewport (Paperspace).

Remarks:


We also have a tsl that labels the beams of the element hsb_E-Identification & Marking
We also have a tsl that labels beams, metalparts, polylines with beams hsbMarkerLines.
We also have a tsl that labels beams with beams hsb_T-Markerline.
We also have a tsl that labels the beams of the element hsbT-Marking.
We also have a tsl that labels the beams of the element hsb_T-SingleMark.
We also have a tsl that marks the beams of the element hsb-MarkBeams.

Work flow:


hsbTSL ECS Symbol

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbTslSettingsIO

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbToolReport

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.???

Description:


This tsl

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsbTranslatedText

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.???

Description:

This tsl translates the given string into the current language if the text in embraced with vertikal pipes''.

 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:





Offsetted_Parallel_Housing

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl 

 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:

- General:

Pitzl HVP

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl...

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Pitzl Pfostenträger

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl 
 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Pitzl SPP-Verbinder

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl...
 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Rothoblaas Disc

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl 
 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Rothoblaas Titan

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ....

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Rothoblaas Typ F70

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ....

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Rothoblaas Typ R

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl creates Rothoblaas post bases type R on one or multiple beams.

 

Insert: Manual insert

This tsl has to be added in Model space.
TSL can be inserted in different ways:
Without point selection (just press enter) the TSL will be inserted on the bottom point of vertical beams, only.
It is always pointing downwards, then. The bottom point of the original beam will be the bottom of the post base.

With point selection, the selected point will be projected to the x-axis of each beam. This projected point will become the bottom point of the post base.
Sloped beams are possible with this method, but no horizontal ones.
With the point selection it's even possible to insert the post base upside down on top of a post.

Remarks:

Type:
R10 = Flat top plate
R20 = Top plate with threaded rod
R30 = Disc type top plate with threaded rod
R40 = uncovered, passing through threaded rod 

Work flow:





Rothoblaas Typ X

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl creates Rothoblaas post bases type X on one or multiple beams.
 

Insert: Manual insert

This tsl has to be added in Model space.
TSL can be inserted in different ways:
Without point selection (just press enter) the TSL will be inserted on the bottom point of vertical beams, only.
It is always pointing downwards, then. The bottom point of the original beam will be the bottom of the post base.

With point selection, the selected point will be projected to the x-axis of each beam. 
This projected point will become the bottom point of the post base.
Sloped beams are possible with this method, but no horizontal ones.
With the point selection it's even possible to insert the post base upside down on top of a post.

Remarks:

Work flow:




Rothoblaas WHT

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:


This tsl inserts a Rothoblaas WHT anchor at StickFrame Walls, panels or beams.
 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:





Rothoblaas XYLOFON

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl creates Rothoblaas XYLOFON noise absorbers at panel edges or edges, resulting from throughout beamcuts.
 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Only works on Panels.

Work flow:



    

sdMS_Pitch

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ....

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


sdMS_ShopDrawDetailView

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This tsl ....

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Sherpa

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This TSL creates Sherpa connectors between two beams.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Sihga PICK Element:

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20....>\Content\General\TSL.

Description:

This TSL creates SIHGA PICK lifting devices in Roof/Floor Elements, referring to the center of gravity.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



Sihga PICK Wall

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This TSL creates SIHGA PICK lifting devices in Stickframe Walls, referring to it's center of gravity.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:




Simpson StrongTie BT

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\General\TSL.

Description:

This TSL creates a Simpson StrongTie connector of BT families.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:





Feedback and Knowledge Base