TSL | Content \ UK \ TSL \ Standard \ General*

JS Sept-2017

Description:

tsl is the abbreviation for Tool Script Language and is a programming language.
With the help of this programming language, you can program dynamic connection/tools (e.g. metal parts) and other dynamic applications.
When our standard tsl's are updated this will be updated in the hsbContentDutch.

Location:

These are saved in your C:\Program Files\hsbcad\<hsbcad20..>\Content\UK\TSL\Standard\General

Explanation:

The UK tsl's are divided into different categories.

CLT

Electrical
TSL | Content \ UK \ TSL \ Standard \ General
Shopdraw and SubAssembly

Steel


Assign Milling to Openings (Master): This tsl Mills around Window and Door OpeningsSelect an Element and Enter Properties for Milling. 
Assign Milling to Openings (Slave): This tsl Mills around Window and Door OpeningsSelect an Element and Enter Properties for Milling. 
Attach Beam to Wall - Pocket & Point Load: This tsl creates studs for pockets or point loads over multiple stories in an Element.
Corner Bracket TSL: This tsl ...
Floor_DimSheathingOversail: This tsl dimensions the "oversail" of a particular sheeting zone to the zone 0 frame. ...
hsb_A4 Layout: This tsl creates dimensions in the wall elevation layout for the studs, sheeting, openings, blockings and show some wall information like nailing offset, frame weight and wall description.
hsb_Anchor: This tsl ...
hsb_Apply Glue to Elements: This tsl creates glue lines in 10 zones for walls and floors, and attaches information for export.
hsb_Apply Naillines to Elements: This tsl creates nail lines in 10 zones for StickFrame walls and attaches information for export.
hsb_AreaTakeOff: This tsl export the perimeter, area, number of corners and opening perimeter to the data base.
hsb_AssignBeamsToGroup: This tsl assigns beams with a specific code to a floor level group specify by a property.
hsb_AssignBeamToElementZone: This tsl assigns beams to a zone of an element.
hsb_AssignElementToMultiwall: This tsl assigns an element to a multiwall number and sets a sequence number based on selection. 
hsb_AssignEntitiesToLooseGroup: This tsl assigns entities to a loose group.
hsb_AssignOpeningWeight: This tsl assigns the weight to the windows and doors base on the type of glass and also the timber and their area.
hsb_AssignSheetsToElement: This tsl assigns sheets to a zone of an element.
hsb_AssignTrussEntityToElement: This tsl assigns truss entity to element.
hsb_AssignTSLToMultipleElements: This tsl assigns a TSL none exclusively to the group of all the element selected.
hsb_BattenDistributionSettings: This tsl ...
hsb_Battens: This tsl creates horizontal battens in openings. 
hsb_BattensAroundOpenings: This tsl creates battens around openings with an option to exclude doors, this battens will be assign to a zone of the element.
hsb_Beam Profile Output: This tsl creates a small profile shopdraw with the dimensions of every beam that is not rectangular and quantify them.
hsb_BeamNotch: This tsl creates a cut with the shape of the male beam into the female beam, mainly used for profile beams.
hsb_BOMLink: This tsl creates a Bill of Material in Modelspace (entity based), Paperspace (element based) or shopdraw space.
hsb_BoxBlock: This tsl converts a stud with code "BOXBLOCK" into 2 pieces of 200mm length on top and bottom of the panel.
hsb_CavityCloser: This tsl calculates the cavity closer base on the height of the openings or the width of the doors and export an ElemItem with the information to the dBase.
hsb_CheckingTable: This tsl reates a table in model with the wall group, wall code, wall height, pitch, nailing information and lintel information of the selected elements.
hsb_CheckModularStuds: This tsl creates a stud or circle when centres between studs have been exceeded.
hsb_CleanupBlocking: This tsl cuts in an angle the blocking that intersects the angled top plates leaving a clean connection.
hsb_CleanupOverlapWithRipStud: This tsl rip the left and right stud when the king stud is overlapping them or rip the king stud when it is outside of the wall outline.
hsb_CleanupSpandrelApex: This tsl cuts the angle plate that intersect the bottom plate and if necesary apply a blocking piece.
hsb_CleanupStudInDynamicConnection: This tsl moves the left and right studs back to the location of the sheeting zone define by the material.
hsb_CNCGroupExport: This tsl calls the exporter for a specific group with all the entities or only the selected ones.
hsb_ColumnBaseWithFinPlate: This tsl adds a Column Foot with Fin PlateGlued rods.
hsb_ColumnBaseWithGluedRods: This tsl adds a Column Foot with Glued rods.
hsb_ConvertBattensToBeams: This tsl converts the sheeting of a specific zone to beams and assign name, material, grade.
hsb_ConvertBeamsToProfiles: This tsl convert any beams that match section size to one of the profiles described in the properties.
hsb_ConvertBeamToSheet: This tsl converts the beams with a beam code into sheets and assign it to a specific zone.
hsb_ConvertStudsToProfiles: This tsl
hsb_CopyLabelIntoInformationField: This ts displays various properties of a genbeam with a delimiter.
hsb_CoverStrip: This tsl creates a sheeting under the elements.
hsb_CreateBlockingOnWallConnection: This tsl creates 3 rows of blocking between the studs that are at the left and right of a wall T connection.
hsb_CreateBoardsBetweenStuds: This tsl creates sheeting boards with 2 batters to support them. They are created between studs and flush to zone 6.
hsb_CreateElement: This tsl creates a floor element around the selected beams and assign it to the current group.
hsb_CreateHeadbinder: This tsl creates a headbinder on the selected elements and clean the connections.
hsb_CreateMidHeightBlocking: This tsl places blockings.
hsb_CreateMillingAroundOpenings: This tsl is used to mill around openings.
hsb_CreateMultipleHeightBlocking: This tsl
hsb_CreateMultipleStuds: This tsl creates multiple studs replacing the existing one, it will create them as a module.
hsb_CreateSheetAroundOpening: This tsl
hsb_CreateSoleplate: This tsl Creates a sole plate under Wall / CLT Elements.
hsb_dBaseFilter: This tsl sets the wall information to Square, Shaped or Special base on some rules.
hsb_DimemsionAngleStuds: This tsl creates angle dimensions on the layout for the left and right stud.
hsb_DimemsionAngleWall: This tsl creates angle dimensions when it finds an angle top plate.
hsb_DimensionHeadBinder: This tsl creates dimension in model of the headbinder.
hsb_DimensionSolePlate: This tsl
hsb_DimensionStuds: This tsl dimensions the studs that intersect the bottom plate.
hsb_DimensionWallLength: This tsl dimensions the length of the wall and place the dimension line on the symbol side of the wall.
hsb_DisplayYield: This tsl
hsb_DoubleTennonAtBeamEnd: This tsl
hsb_DrawBlock: This tsl draws the name of block that the master TSL set this one with.
hsb_DrawFoundationLine: This tsl creates a reference line for the foundation with some offsets from the walls.
hsb_DrawOutline: This tsl creates a reference line around the element, beams or floors.
hsb_DrawXonWindow: This tsl draws and X on the opening that have a point load over them.
hsb_DSP-SeatCut: This tsl
hsb_Element Code: This tsl displays the element subtype in model.
hsb_ElementBOM: This tsl creates a bill of materials in the Layout for Walls or Floors.
hsb_ElementComponentsTable: This tsl
hsb_EraseNoTagBeams: This tsl
hsb_EraseShortBeams: This tsl
hsb_ExportLoad: This tsl creates a point, line or area with a specific load and stores that value, it will get export to View.
hsb_ExtraElementData: This tsl exports to the dBase the corner type, junction types and all opening information.
hsb_FireWallAdjust: This tsl creates beams front and back inside of a wall with a gap in between and a full piece of OSB arount the wall and the openings to close it.
hsb_FlipBlockingOnWalls: This tsl rotates 90 degrees the blocking pieces that are inside of a wall.
hsb_FloorBlockingSplit: This tsl splits all the beams inside of a floor that have a code "B" if they overlap any joist.
hsb_FloorDeckingNailing: This tsl creates nail lines in a zone of the floor.
hsb_FloorDimension: This tsl
hsb_FloorRoofBOM: This tsl creates a BOM of the beams and sheeting that are attach to the roof/floor and categorize them in groups.
hsb_FloorSheetingDistribution: This tsl distributes the sheet above and below openings depending on width and height of available sheets.
hsb_FloorSheetingDistributionParallel: This tsl
hsb_FrameNail: This tsl places nails in the studs/Joist. This is the master tsl.
hsb_FrameNailing: This tsl
hsb_FrameWallsByCode: This tsl triggers the generation of all selected walls that have a specific code.
hsb_GableLadder: This tsl
hsb_GeneralPanelNester: This tsl
hsb_GlueArea: This tsl
hsb_H&MBeamMark: This tsl places marks on places where two beams are touching each other. Head-to-head contacts are not considerd.
hsb_Hanger: This tsl creates a hanger with a generic representation of the model.
hsb_HangerDefinition: This tsl
hsb_HangerFaceDefinition: This tsl
hsb_HatchBeams: This tsl hatchs beams with an specific code in paper or shopdraw space.
hsb_HatchSheets: This tsl hatchs sheets of a zone in paper space.
hsb_Insulation: This tsl created Solid Insulation between the timbers with an option for a thinner insulation when there is a flat stud.
hsb_IntegrateAllBeams: This tsl
hsb_IntegrateStudsOnPlates: This tsl
hsb_Inv-AssignSheetItemToArea: This tsl
hsb_InventoryDB: This tsl
hsb_Ladder: This tsl
hsb_LayoutPlanSection: This tsl creates a view of a TF wall in layout and displays according to he following symbols and UCS of the viewport: 'O' (letter O): Shows o, '\\' (double backslash): Shows slash, '/' (frontslash): Shows frontslash, 'X': Shows X, 'N': No display, 'S': Shows outline, '-': Shows line through timber.
hsb_LiftHolesOnStuds: This tsl
hsb_Lifting Holes: This tsl
hsb_LiftingHolesAutomatic: This tsl
hsb_LinkBeamsToElement: This tsl assigns beams to a zone of an element.
hsb_LintelPacking: This tsl creates packing (9mm Sheets) between the packer and the header if the distance is less than 40mm or between the opening and the header if there is no space for a transom.
hsb_LockAndTagBeams: This tsl
hsb_LockBeams: This tsl
hsb_LooseMaterials: This tsl
hsb_ManageLooseGroupEntities: This tsl
hsb_MultiWallReport: This tsl
hsb_NailPlate: This tsl
hsb_NesterCaller: This tsl
hsb_NotchStuds: This tsl
hsb_NoToolArea: This tsl
hsb_Opening Description: This tsl
hsb_OpeningDescriptionHSB2ACA: This tsl
hsb_OverwriteTConnection: This tsl overwrites the existing T connection by applying the "hsb_Wall to Wall Connection" TSL.
hsb_Packs: This tsl
hsb_PocketPointLoad: This tsl creates studs for pockets or point loads over multiple stories.
hsb_ProjectSettings: This tsl
hsb_RedistributeJacks: This tsl redistributes Jacks under and above openings from Left, Centre & Right of the opening.
hsb_RedistributeSheeting: This tsl redistributes sheets that have been set to Vertical Sheets with the a property for minimum width.
hsb_ReduceBlockingLength: This tsl reduces the length of blockings on either side by a defined distance.
hsb_Remove Naillines: This tsl removes nail lines for stickframe walls.
hsb_RemoveBattens: This tsl
hsb_RemoveBeamsAndSheetsUnderDoors: This tsl removes framing and sheets under doors for stickframe walls for e.g. floating floor to run through.
hsb_RemoveBlockingAboveOpening: This tsl remove blocking above blocking excluding some beams by code.
hsb_RemoveInsulation: This tsl removes sheeting which has the material set as "Insulation" from a selected zone.
hsb_RemoveModuleInformation: This tsl removes the Module Information of the beams that can find inside a wall with an specific code.
hsb_RemoveNoNailCodeFromBeams: This tsl
hsb_RemoveSheetingFromZone: This tsl removes alls sheets from a selected zone.
hsb_RemoveSheetsFromWalls: This tsl removes alls sheets from zones in walls.
hsb_RenameElements: This tsl renames the selected elements.
hsb_ReportGroupCount: This tsl gives a message with the number of groups that the drawing has.
hsb_RevolutionMillTool: This tsl
hsb_RipHeader: This tsl reduces the size of headers to fit the allowable space above an opening and produces a report of what has been ripped down.
hsb_SetBeamId: This tsl sets hsbIDs to beams based on the value in the property.
hsb_SetBeamName: This tsl sets the timber name, material & grade based on beam types for stickframe walls, and copy the material of all the sheets to the name field.
hsb_SetBeamNameByCode: This tsl
hsb_SetBeamNameFloor: This tsl sets the material, grade and information for beams in a floor, based on beamcodes.
hsb_SetDynamicCustomDetail: This tsl sets the edge detail overide for walls which have predefined overides in the 'O' column depending on the sheet thickness of the connecting wall.
hsb_SetFloorBeamMaterial: This tsl sets the material and beam type of the beams that are draw in a floor.
hsb_SetFloorElementDescriptionFromCatalog: This tsl sets the DSP edge details from a floor catalog for hsbFloor/Roof Openings.
hsb_SetGenBeamColorByMaterial: This tsl
hsb_SetHeadBinderCode: This tsl sets the beam code of the headbinder to "V" and the beam type to _kSFVeryTopPlate.
hsb_SetHeaderDescriptionOnPropSet: This tsl adds property set data to the openings in an element. The property set has to be called "Door Schedule" and have an empty field "Header_Description".
hsb_SetInformationOnPropSet: This tsl
hsb_SetLeftAndRightStudModule: This tsl
hsb_SetLogSidingProfile: This tsl
hsb_SetLooseBeamName: This tsl sets the beam name from B1 to B20.
hsb_SetModuleInformation: This tsl
hsb_SetModuleOnWindowDoorAssembly: This tsl
hsb_SetOpeningConfiguration: This tsl sets the support/non support beam configuration for a set of openings in the stickframe.
hsb_SetOpeningFloorDescriptionFromCatalog: This tsl sets the DSP edge details from an opening catalog for hsbRoof Openings.
hsb_SetWallConstructionDirectives: This tsl sets the wall height of stickframe walls.
hsb_SheetingLayoutDimension: This tsl dimensions any zone verticaly or horizontaly in relation to the origin of the beams.
hsb_SheetingOversail: This tsl displays the amount of overhang or underhang for sheeting on floor cassettes as a piece of text with a defined suffix e.g "32mm Overhang"
hsb_ShowElementInformation: This tsl shows various information from an element for the layout.
hsb_ShowElementWeight: This tsl exports ElemItem with information of the stickframe weight to the database.
hsb_ShowFloorDiagonal: This tsl shows a diagonal dimension for floor cassettes.
hsb_ShowGenbeamInformation: This tsl displays various properties of a genbeam with a delimiter.
hsb_ShowNailingDescription: This tsl shows nailing specification for Perimeter and Intermediate for a stickframe wall, which has been applied by "hsb_Apply Naillines to Elements".
hsb_ShowPanelLabourCost: This tsl displays labour cost of stickframe walls, based on area, shape and price defined in the properties.
hsb_ShowPosnum: This tsl displays the position number on beams in the modelspace.
hsb_ShowPOSNumSoleplate: This tsl displays the Position Number of Beams With the name "Headbinder" or "Soleplate".
hsb_ShowSheetSize: This tsl
hsb_ShowSIPSplines: This tsl displays "Spline" for beams with the name Spline, and "Timber" for all other beams on a SIP Element Layout.
hsb_ShowSIPSplinesOnLayout: This tsl Shows the beam names on the layout of an element.
hsb_ShowSIPWeight: This tsl on Layout show the total weight of a Sip Panel.
hsb_ShowWallInformation: This tsl shows wall description, section size & panel weight based on density selected in the properties.
hsb_Simpson_PHB: This tsl
hsb_SimpsonETB: This tsl
hsb_SIP-EdgeBom: This tsl
hsb_SIP-Fillets: This tsl
hsb_SIP-HeaderConfiguration: This tsl
hsb_SIP-JoinBottomPlate: This tsl joins all bottom plates of SIP panels, can be used on generation as well as selecting elements.
hsb_SIP-OpeningFrameAdjustment: This tsl
hsb_SIP-SetEdgeSquare: This tsl
hsb_SIPsRemoveSoleplateAndHeadbinder: This tsl remove the soleplate and headbinder of the SIP panels.
hsb_SipWidth: This tsl shows Width Height and Thickness of SIP Panels in Layout.
hsb_SlotSingleBeam: This tsl adds a slot tool to a beam.
hsb_SolePlate Material Table: This tsl
hsb_SolePlate TableEntry: This tsl
hsb_SpaceStud: This tsl
hsb_Split Walls: This tsl automatically splits and generates walls based on maximum length, distance to openings, connections and wall edges.
hsb_SplitBattens:This tsl splits battens on a specific zone based on a maximum length while reusing waste for the next row.  
hsb_SplitBattensAtOpenings: This tsl ???
hsb_SplitBeamsWithLapJoint: This tsl plits any beam in an Element that is longer than a property and create a lap joint connection between them.
hsb_SplitBeamsWithScarfJoint: This tsl splits any beam that is longer than a property and create a lap joint connection between them.
hsb_SplitBeamWithTenonConnection: This tsl splits any beam that is longer than a property and create a lap joint connection between them.
hsb_SplitBlockingBeams: This tsl splits a single beam having beamcode "D" between all the studs and sets the name to Blocking & Type to _kSFBlocking.
hsb_SplitPlates: This tsl places splits to the headbinder, the top- and the bottomplate.
hsb_StudDistribution: This tsl redistributes studs to the left or right of the distribution point for stickframe walls.
hsb_TagGenBeamsForCNC: This tsl
hsb_UnLockBeams: This tsl unlocks the beams which have already been locked to an element.
hsb_Vent: This tsl creates a vent and generates timbers around the prededefined defined vent area.
hsb_Wall to Wall Connection: This tsl creates T-connections between two different Walls. U-Shape / L-Shape and multiple studs.  
hsb_WallAngleFillet: This tsl creates fillet timbers between open angled Stickframe walls and assigns the fillets to their respective elements.
hsb_WallArea: This tsl displays the Wall Element area on a selected place in the drawing  
hsb_WallBOM: This tsl creates a bill of materials in the Layout for Stickframe Walls in predefined groups.
hsb_WallKey: This tsl displays a Key (small drawing) in a layout or shop drawing for the position of an element within a house group.  
hsb_WallPanelSchedule: This tsl creates a table of Wall Number,Description,Height,Length,Max Weight,Area for Stickframe walls in the modelspace.
hsb_WallSchedule: This tsl draw a table in model with information from the panel and export it to Excel.
hsb_WeightCalculationExportToDB: This tsl exports ElemItem with information of the stickframe weight to the database.
hsb_WindowFlipSheet: This tsl distributes the sheet above and below openings depending on width and height of available sheets.
HSB_W-Post: This tsl creates a post (Extrusion profile) in an Element with the plates in certain zone.
HSB_W-SplitPlates:This tsl places splits to the headbinder, the top- and the bottomplate.
hsbBOM: This tsl creates a bill of material of a set of entities.
hsbCAD Multi-Wandknoten: This tsl
hsbCAD_Multi Point Load: This tsl creates studs for pockets or point loads over multiple stories.
hsbCAD_Point Load: This tsl creates studs for pockets or point loads over multiple stories. (Child tsl of hsbCAD_MultipointLoad)
hsbCAD_Show Frame Weight: This tsl will show the frame and total weight of an Element. 
HSB-DimensionFloor:This tsl dimensions the floor of an element in a layout.
hsbExtraDetails: This tsl applies extra details to multiple stickframe elements.
hsbLiveSection R12:This tsl creates a section in the drawing 
hsb-MarkBeams: This tsl creates marker lines for a t-connection.  
hsb-SteelProfileFlip: This tsl distributes the sheet above and below openings depending on width and height of available sheets.  
hsh_IntegrateAllBeams: This tsl integrates the male beam in the female beam but only works with beam width of 30 or 42 mm.
I-joist Hanger Display: This tsl inserts graphical representations of different hangers, and offering manual data entry to pass to export. ??
IOMethods: (Slave tsl) 
Layout_Dim_Beam This tsl dimensions beams or sheets of an elements in a viewport  
Layout_DIM_Elements_Type2: This tsl dimensions beams or sheets of an elements in a viewport  
Layout_DIM_Sheathing_Oversail: This tsl dimensions the "oversail" of a particular sheeting zone to the zone 0 frame.
Layout_Sheet_Text_Diagonal_Line: This tsl places a single diagonal line on the sheets.
Layout_Sheeting_Dim: This tsl dimensions the sheets.  
Link Timber for ShopDrawings: This tsl shows other beams in the shopdrawing of a primary selected beam.
RafterCutEnd: This tsl ??
RecreateBeamCodeString: This tsl
ScandiByg_MEPMasterAssignment: This tsl
SIP_Element_Dimensions_PS: This tsl creates dimensions in the wall elevation layout for the element, openings and panels in the 4 sides of the wall.

Assign Milling to Openings (Master)

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl "Use to Mill around Window and Door OpeningsSelect an Element and Enter Properties for Milling. This will also place milling lines on the left and right of an element."

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Assign Milling to Openings (Slave)

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl "Use to Mill around Window and Door OpeningsSelect an Element and Enter Properties for Milling. This will also place milling lines on the left and right of an element."

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Attach Beam to Wall - Pocket & Point Load

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl creates studs for pockets or point loads over multiple stories in an Element.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:





Corner Bracket TSL

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl ...

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Floor_DimSheathingOversail

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl dimensions the "oversail" of a particular sheeting zone to the zone 0 frame.

Insert: Manually insert

This tsl has to be added in Paper space.

Remarks:

Work flow:


hsb_A4 Layout

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl creates dimensions in the wall elevation layout for the studs, sheeting, openings, blockings and show some wall information like nailing offset, frame weight and wall description.


Insert: Manually insert

This tsl has to be added in Paper space.

Remarks:

Work flow:


hsb_Anchor

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl ... 


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



 

hsb_Apply Glue to Elements

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl creates glue lines in 10 zones for walls and floors, and attaches information for export.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:




hsb_Apply Naillines to Elements

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl creates nail lines in 10 zones for StickFrame walls and attaches information for export.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:




hsb_AreaTakeOff

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl Export the perimeter, area, number of corners and opening perimeter to the data base.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsb_AssignBeamsToGroup

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl assign beams with a specific code to a floor level group specify by a property.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:




hsb_AssignBeamToElementZone

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl assigns beams to a zone of an element.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:




hsb_AssignElementToMultiwall

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl assigns an element to a multiwall number and sets a sequence number based on selection.To be used in conjunction with the exporter's multiwall extension.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsb_AssignEntitiesToLooseGroup

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl assigns entities to a loose group.

Insert: Manually insert

This tsl has to be added in Model space.
insert the tsl, select the beams and or Sheeting.
A group (Called Loose) will be created in the hsbConsole.
The selected beams/Sheets are placed in this group.

Remarks:

Work flow:


hsb_AssignOpeningWeight

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl assigns the weight to the windows and doors, based on the type of glass and also the timber and their area.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:




hsb_AssignSheetsToElement

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl assigns sheets to a zone of an element.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:





hsb_AssignTrussEntityToElement

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl assigns truss entity to element.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsb_AssignTSLToMultipleElements

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl assigns a TSL none exclusively to the group of all the element selected.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsb_BattenDistributionSettings

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

Settings for batten distribution construction plugin.

Insert: Manually insert

This tsl has to be added in Model space.
Insert the tsl, Select an Element

Remarks:

Settings for batten distribution construction plugin

Work flow:




hsb_Battens

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl create horizontal battens in openings, it will take in consideration if they are opening assemblies too if the TSL "hsb_SetModuleOnWindowDoorAssembly" is used prior to this one.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsb_BattensAroundOpenings

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl creates battens around openings with an option to exclude doors, this battens will be assign to a zone of the element.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:




hsb_Beam Profile Output

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl Creates a small profile shopdraw with the dimensions of every beam that is not rectangular and quantify them.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


hsb_BeamNotch

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl creates a cut with the shape of the male beam into the female beam, mainly used for profile beams.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:


Feedback and Knowledge Base