TSL | Content \ Dutch \ TSL \ (P)anel-CLT

JS: Sep 2017Author

Description:

tsl is the abbreviation for Tool Script Language and is a programming language.
With the help of this programming language, you can program dynamic connection/tools (e.g. metal parts) and other dynamic applications.
When our standard tsl's are updated this will be updated in the hsbContentDutch.

Location:

These are saved in your C:\Program Files\hsbcad\hsbcad20...\Content\Dutch OR General folder

Explanation:

The Dutch tsl's are divided into different categories.

TSL | Content \ Dutch \ TSL \ (D)imensioning

TSL | Content \ Dutch \ TSL \ (E)Element
TSL | Content \ Dutch \ TSL \ (F)loor

TSL | Content \ Dutch \ TSL \ (G)General

TSL | Content \ Dutch \ TSL \ (I)nformation

TSL | Content \ Dutch \ TSL \ (L)og

TSL | Content \ Dutch \ TSL \ (P)anel-CLT 
TSL | Content \ Dutch \ TSL \ (R)oof

TSL | Content \ Dutch \ TSL \ ((S)ip

TSL | Content \ Dutch \ TSL \ (T)imber

TSL | Content \ Dutch \ TSL \ (W)all

TSL | Content \ General \ TSL

hsb_CLT-DoveTail: This tsl makes a dove tail between a beam and a CLT Panel.
hsb_GeneralPanelNester: This tsl nests childpanels or P-lines
hsb_P-AssignInstallationType: This tsl assigns electrical symbols to an installation object.
hsb_P-Electrical: This tsl has been replaced by the hsb_P-InstallationPoint.
hsb_P-InstallationPoint: This tsl will add Electricity to a Panel Element.
hsb_P-Pocket: This tsl will make a U opening in the panel Element.
hsb_P-Surface: This tsl shows the type of surfaces which are used for the selected panel.
hsb_S-CorrectOrientation: NEW This tsl ....
hsb_S-EdgeBeams: This tsl modifies an edge detail of sip panels
hsb_S-InsertDetailNames: This tsl places detail texts at a given position
hsb_ShowPanelLabourCost: This tsl Displays labour cost of stickframe walls, based on area, shape and price defined in the properties.
hsb_SIP-SetPanelMaterial: This tsl set's the material of the SIPs inside a wall
hsb_SIP-SetSizeConvention: Corrects the width and height convention of timbers generation.
hsbCLT-Chamfer: This tsl defines a polyline based tool for chamfers.
hsbCLT-CoreDrill: This tsl creates a core drill on the edge of a sip/CLT panel.
hsbCLT-CornerCleanUp: This tsl creates cleanup drills at concave corners.
hsbCLT-Dovetail: This tsl defines a dove tail connection or a butterfly spline on an edge between at least two panels.
hsbCLT-Dovetail-G: This tsl defines a dove tail connection or a butterfly spline as G-Connection (Mitre) between at least two panels.
hsbCLT-Dovetail-T: This tsl defines a rabbet / tenon joint between T-connected panels
hsbCLT-Detail: This tsl specifies a detail section. A Detail will always be seen towards the outer grip of the section.
hsbCLT-Electra: This tsl will add Electricity to a Panel Wall.
hsbCLT-ElementSplit: This tsl defines a split location on a wall element.
hsbCLTJointBoard: This tsl creates a joint board between 2 panels.
hsbCLT-LapJoint: This tsl defines a lap joint on one edge between at least two panels.
hsbCLT-LevelMarker: This tsl calculates the required lifting system depending from the given parameters, the panel weight and it's point of gravity
hsbCLT-Lift: This tsl will create drills for the lifting device.
hsbCLT-Lifter: This tsl will create drills for the lifting device.
hsbCLT-OpeningSplit: This tsl splits panels at an opening and extents the header panel by the given value.
hsbCLT-Rabbet: This tsl defines a rabbet / tenon joint between T-connected panels.
hsbCLT-SetProperties: Add properties to panels.
hsbCLT-SectionDetail: This tsl is an information tool, when you look in plan view you will be able to see the Lapjoints for nesting purposes.
hsbCLT-StretchByLine: This tsl will stretch a panel through a line with the given bevel.
hsbCLT-T-Connector: This tsl creates a T-shaped connector for CLT panels.
hsbCLT-TongueGroove: This tsl creates a tongue groove in the CLT panels. 
hsbCLTWall: This tsl generates pseudo log elements based on child stickframe walls.
hsbCLT-X-Fix-Connector: This tsl creates X-Fix connectors between panels.
hsbDrill: This tsl creates a drill distribution along X-Direction of a genbeam, optional one can connect additional genbeams with it. Content\Dach\TSL
hsbGrainDirection: This tsl will put the grain direction on the panel.
hsbPanelBeamcut: This tsl supports any extruded solid shape if the extrusion profile consists exclusively of straight segments.
hsbPanelDrill: This tsl will drill a hole a panels.
hsbPanelElectra: This tsl has been replaced by the hsbCLT-Electra.
hsbPanelExtendedMasterData: This tsl creates a bill of material table for master panels
hsbPanelGrainDirection: This tsl has been replaced by the hsbGrainDirection.
hsbPanelHeaderAboveOpening: This tsl will puts a header above an opening.
hsbPanelLapJoint: This tsl will split your panel and add a lapjoint.
hsbPanelLiftingDevice: This tsl calculates the required lifting system depending from the given parameters, the panel weight and it's point of gravity
hsbPanelOpeningFillet: This tsl modifies existing windows or doors like openings in an existing panel such that any corner will receive a fillet with the given radius.
hsbPanelRabbet: This tsl creates a lapjoint connection between two floor/Roof panels.
hsbPanelWallRabbet: This tsl creates a lapjoint connection between two floor/Roof panels.
hsbPolylineBeamcut: This tsl creates segemented beamcuts along a polyline or define points.
hsbSolid2Panel: This tsl converts a given 3DSolid into an hsbPanel
hsbSolid2PanelConversion: This TSL converts solids into hsbPanels under respect of typical CLT requirements
PanelPosNum: This tsl displays the Sip PosNr. in the shopdraw
SIP_Element_Dimensions_PS: This tsl places dimension lines around an element. Several parts of the element can be dimensioned.
SIP_Roof_Dimensions_PS: This tsl dimensions splays the Sip PosNr. in the shopdraw.

hsb_CLT-DoveTail

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL
This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General 

Description:

This tsl makes a dove tail between a beam and a CLT Panel.

 

Insert: Manually insert

This tsl has to be added in Model space.
Insert the tsl, select a beam and then a CLT Panel.

Remarks:

Work flow:

General: Changing information for the dovetail connection in the properties.




hsb_GeneralPanelNester

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General

Description:

This tsl nests childpanels or P-lines.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_P-AssignInstallationType

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL
This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General  

Description:

This tsl assigns electrical symbols to an installation object.
This tsl is used by hsb_P-InstallationPoint.

Insert: Manually insert

This tsl has to be added in Model space.
To insert the tsl, select the Panel, then select the position.   

Remarks:

Work flow:



hsb_P-Electrical

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl has been replaced by the hsb_P-InstallationPoint.

Insert: Manually insert

This tsl has to be added in Model space.
To insert the tsl, select the Panel, then select the position.

Remarks:

This tsl replaces's the old hsb_P-Electrical tsl.
There are also other Electricity tsl's hsb_P-Electrical (Replaced)/ hsb_P-InstallationPoint / hsbCLT-Electra / hsbPanelElectra (Replaced)

Work flow:



hsb_P-InstallationPoint

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL
This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General    

Description:

This tsl will add Electricity to a Panel Element.


Insert: Manually insert

This tsl has to be added in Model space.
To insert the tsl, select the Panel, then select the position.

Remarks:

There are also other Electricity tsl's hsb_P-Electrical (Replaced)/ hsb_P-InstallationPoint / hsbCLT-Electra / hsbPanelElectra (Replaced)


Work flow:



hsb_P-Pocket

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL
This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General   

Description:

This tsl will make a U opening in the panel Element.

Insert: Manually insert

This tsl has to be added in Model space.
Select first the beam or panel to create a pocket for, then select the panel.

Remarks:

Dialog headers:

Work flow:

General settings:




hsb_P-Surface

<(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl shows the type of surfaces which are used for the selected panel.
This tsl will add the visible and none visible side.
The TSL needs information from the properties set.

 

Insert: Manually insert

This tsl has to be added in Model space.
Select a set of panels. A tsl will be auto-inserted per panel. The TSL needs information from the properties set.

Remarks:

Work flow:



hsb_S-CorrectOrientation

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl

Insert: Manual insert

This tsl has to be added in Model space.
Can be attached to element generation.

Remarks:

You can also join beams with the same edge code.

Work flow:



hsb_S-EdgeBeams

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

Linked to edge codes
Create beams on edge of sip.
Edge code is used to identity edge

Insert: Manual insert

This tsl has to be added in Model space.
Can be attached to element generation.

Remarks:

You can also join beams with the same edge code.

Work flow:



hsb_S-InsertDetailNames

<(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl places detail texts at a given position.

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_ShowPanelLabourCost

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\UK\TSL\Standard\General    

Description:

This tsl Displays labour cost of stickframe walls, based on area, shape and price defined in the properties.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_SIP-SetPanelMaterial

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:

This tsl set's the material of the SIPs inside a wall

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_SIP-SetSizeConvention

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:

Corrects the width and height convention of timbers generation

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbCLT-Chamfer

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL     

Description:

This tsl defines a polyline based tool for chamfers.
The insertion Mode is Circumference (A1), by opening (A2) , both (A3) , by direction (A4) , by polyline (A5), by path (A6) . It allows you to choose the alignment, reference side (B1), opposite side (B2), or both (B3).



Insert: Manually insert
This tsl has to be added in Model space.
if needed, first draw a polyline on the panel,

Remarks:

Work flow:



hsbCLT-CoreDrill

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl    
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\UK\TSL\Standard\CLT  

Description:

This tsl creates a core drill on the edge of a sip/CLT panel.
It needs a supporting Tool like the hsbPanelDrill.

Insert: Manually insert

This tsl has to be added in Model space.
First drill a few holes in the panel with the hsbPanelDrill, then you can connect these drills with a coredrill to the edge of the panel.

Remarks:

Work flow:



hsbCLT-CornerCleanUp

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl    
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\UK\TSL\Standard\CLT   

Description:

This tsl creates cleanup drills at concave corners.
One can select between different insertion modes.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:

Dialog headers:

hsbCLT-Dovetail

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL 

Description:

This tsl defines a dove tail connection or a butterfly spline on an edge between at least two panels. On insert it may create a split if only one panel was selected.
The closest point to the main contour in relation to the reference point defines the edge where the joint is. This tsl has to be added in Model space.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:

A : defines the width of the base of the dovetail
B : defines the depth of the base of the dovetail
C : defines the angle in the length of the dovetail
D : gap between the female and male part of the dovetail 
E : position from the axis
F : defines the offset from the bottom of the panel
G : selection dovetail or butterfly spline
E : creates a chamfer on the split of the panel 
F : creates a chamfer on the split of the panel  



hsbCLT-Dovetail-G

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL 

Description:

This tsl defines a dove tail connection or a butterfly spline as G-Connection (Mitre) between at least two panels.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Identical use as hsbCLT-Dovetail  

Work flow:



hsbCLT-Dovetail-T

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL 

Description:

This tsl defines a rabbet / tenon joint between T-connected panels, The tool stretches the closest edge(s) to the designated plane.
 

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Identical use as hsbCLT-Dovetail   

Work flow:



hsbCLT-Detail

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl    
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\UK\TSL\Standard\CLT   

Description:

This tsl specifies a detail section. A Detail will always be seen towards the outer grip of the section.
If both grips are not outside the panel the grip which is closer to the panel profile will determine the direction.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbCLT-Electra

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:

This tsl will add Electricity to a Panel Wall.
This tsl replaces the hsbPanelElectra tsl.
This tsl creates tools of electrical installations on panels.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

There are also other Electricity tsl's hsb_P-Electrical (Replaced)/ hsb_P-InstallationPoint / hsbCLT-Electra / hsbPanelElectra (Replaced)


Work flow:



hsbCLT-ElementSplit

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL  

Description:

This tsl defines a split location on a wall element.


Insert: Manually insert

This tsl has to be added in Model space.
Select one or more elements.

Remarks:

Work flow:



hsbCLTJointBoard

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL  

Description:

This tsl creates a joint board between 2 panels and determine the placement of the board.


Insert: Manually insert

This tsl has to be added in Model space.
Select a set of panels.
The tsl will create multiple joint boards for any two collinear edges of two panels. (or points) lying in the same straight line.
The selected surface needs to be coplanar (In the same plane).
The tool is dependent from the Joint Board (the beam which is created)

Remarks:

Work flow:



hsbCLT-LapJoint

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL  

Description:

This tsl defines a lap joint on one edge between at least two panels. On insert it may create a split if only one panel was selected.The closest point to the main contour in relation to the reference point defines the edge where the lap joint is.


Insert: Manually insert

This tsl has to be added in Model space.
Select a set of panels.

Remarks:

Work flow:



hsbCLT-LevelMarker

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl    
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\UK\TSL\Standard\CLT

Description:

This tsl calculates the required lifting system depending from the given parameters, the panel weight and it's point of gravity
One can release the lifting device collection into individual devices. Released devices are not sensitive to the point of gravity!


Insert: Manually insert

This tsl has to be added in Model space.
Select a CLT panel, then select a point where you want the tet to come.


Remarks:

Work flow:



hsbCLT-Lift

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL   

Description:

This tsl will create drills for the lifting device.

 

Insert: Manually insert
This tsl has to be added in Model space.
Select the CLT panels, the drills will be automatically placed according to what you've fill in the dialog box.

Remarks:

There are also other Lifting tsl's hsbCLT-Lift and hsbPanelLiftingDevice

Work flow:



hsbCLT-Lifter

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:

This tsl will create drills for the lifting device.

Insert: Manually insert

This tsl has to be added in Model space.
Select the CLT panels, the drills will be automatically placed according to what you've fill in the dialog box.

Remarks:

There are also other Lifting tsl's hsbCLT-Lift and hsbPanelLiftingDevice  

Work flow:



hsbCLT-OpeningSplit

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:

This tsl splits panels at an opening and extents the header panel by the given value.



Insert: Manually insert

This tsl has to be added in Model space.
Select the opening in the panels, the panel will be split at the opening and will extent the header panel by the given value.

Remarks:


Work flow:

General: Enter a value for the header.



hsbCLT-Rabbet

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:

This tsl defines a rabbet / tenon joint between T-connected panels.
The tool stretches the closest edge(s) to the designated plane.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbCLT-Setproperties

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL    

Description:

This tsl adds properties to panels

Insert: Manually insert

This tsl has to be added in Model space.


Remarks:

'---' resets the property to blank

Work flow:

General:




hsbCLT-SectionDetail

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\??????

Description:

This tsl is an information tool, when you look in plan view you will be able to see the Lapjoints for nesting purposes.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbCLT-StretchByLine

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl

Description:

This tsl will stretch a panel through a line with the given bevel.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbCLT-T-Connector

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl  

Description:

This tsl creates a T-shaped connector for CLT panels.

Insert: Manually insert

This tsl has to be added in Model space.
Select the Male CLT panel then select the Female panel, than select the point you want the connector to be.

Remarks:

Work flow:

Geometry:
Location:
Slot:
Drill Pattern:    




hsbCLT-TongueGroove

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\Tsl  

Description:

This tsl creates a tongue groove for CLT panels.


Insert: Manually insert

This tsl has to be added in Model space.
Select the CLT panel, select first split point and then select 2nd split point.

Remarks:

This tool requires proper definitions of the custom defined milling heads in HH2-Tab of hsbSettings.
- create the two parts of the tonguegroove in closed polylines.
- the top centerpoint of the closed polyline has to be the originpoint 0,0,0


Work flow:

A : reference side 
B : offset from the reference
C : offset between two panels 
D : distance between two tongues 
E : offset from the reference side
F : creates a chamfer on the split of the panel 
G : offset from the opposite side
H : creates a chamfer on the split of the panel  
I : base of the tongue       
J : depth of the tongue      




hsbCLTWall

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl  

Description:

This tsl generates pseudo log elements based on child stickframe walls
renamed (replaces hsbPanelCLTWall), element tsl's triggered before command ended style detection enhanced, beamcuts on T-Connections enhanced.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbCLT-X-Fix-Connector

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:

This tsl creates X-Fix connectors between panels.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:

A : defines the type of connector
B : offset from top of panel
C : offset from bottom of panel
D : distance between the connectors, this will have an equal distribution of the connectors, closest to the interdistance.
E : position of the connectors on the inner our outer side of the panel
F : creates a chamfer on the split of the panel 
G :creates a chamfer on the split of the panel




hsbDrill

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\ UK\TSL\Standard\CLT

Description:

This tsl creates a drill distribution along X-Direction of a genbeam, optional one can connect additional genbeams with it.



Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbGrainDirection

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Description:

This tsl will put the grain direction on the panel.
This tsl has replaced the old hsbPanelGrainDirection.

Defines the orientation of the top layer during production.
The dimension perpendicular to the grain direction specifies the max production width.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

To change the direction, right click and select ''Custom'' then select Rotate grain direction - Change grain direction.


Work flow:



hsbPanelBeamcut

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT


Description:

This tsl supports any extruded solid shape if the extrusion profile consists exclusively of straight segments.
Note: once this tools applies an opening to the panel it will not be able to close this after the tooling entity.
This tsl creates a beamcut connection between a panel and a beam.
The Beamcut is either grip based openings on through beamcuts or a regular beamcut on not through connections
NOTE: any connection where the X-Axis of the beam is perpendicular to the Z-Axis of the panel is not supported.


Insert: Manually insert

This tsl has to be added in Model space.
Select the panel and then the Tooling (in this case the beam you want to cut out of the Panel)

Remarks:

Work flow:



hsbPanelDrill

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT

Description:

This tsl will drill a hole a panels.
It is now possible to select multiple panels and insertion points, the drills created will only be linked to the interfering panels.
Flip side as doubleclick action added (requires content DACH or appropriate CUIX)
New custom command to assign tool exclusively.


Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbPanelElectra

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT  

Description:

This tsl has been replaced by the hsbCLT-Electra.
This tsl will add Electricity to a Panel Element.
This tsl creates tools of electrical installations on panels.


Insert: Manually insert

This tsl has to be added in Model space. This tsl replaces's the old hsb_P-Electrical tsl.
There are also other Electricity tsl's hsb_P-Electrical (Replaced)/ hsb_P-InstallationPoint / hsbCLT-Electra / hsbPanelElectra (Replaced)

Work flow:



hsbPanelExtendedMasterData

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT  

Description:

This tsl creates a bill of material table for master panels.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbPanelGrainDirection

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT      

Description:

This tsl has been replaced by the hsbGrainDirection.
This tsl will put the grain direction on the panel.
To change the direction, right click and select ''Custom'' then select ''Swap grain direction''.


Insert: Manually insert

This tsl has to be added in Model space.
Select panels.

Remarks:

Work flow:



hsbPanelHeaderAboveOpening

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT   

Description:

This tsl will put a header above an opening.


Insert: Manually insert

This tsl has to be added in Model space.
Select an opening.

Remarks:

Work flow:



hsbPanelLapJoint

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT   

Description:

This tsl will split your panel and add a lapjoint.


Insert: Manually insert

This tsl has to be added in Model space.
Select a Panel and then the point where you want the Panel to be split.

Remarks:

Work flow:



hsbPanelLiftingDevice

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT     

Description:

This tsl creates a drill distribution along X-Direction of a genbeam, optional one can connect additional genbeams with it.
This tsl calculates the required lifting system depending from the given parameters, the panel weight and it's point of gravity.
One can release the lifting device collection into individual devices. Released devices are not sensitive to the point of gravity!

 

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

There are also other Lifting tsl's hsbCLT-Lift and hsbPanelLiftingDevice.

Work flow:



hsbPanelOpeningFillet

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT   

Description:

This tsl modifies existing windows or doors like openings in an existing panel such that any corner will receive a fillet with the given radius.


Insert: Manually insert

This tsl has to be added in Model space.
You need to place the panel in front view.
Select panel and point inside the window or door.

Remarks:

Work flow:



hsbPanelRabbet

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT     

Description:

This tsl has been replaced by the hsbPanelLapJoint.
his tsl creates a lapjoint connection between two floor/Roof panels.


Insert: Manually insert

This tsl has to be added in Model space.
Select the first panel and then the second.

Remarks:

Work flow:



hsbPanelWallRabbet (Removed)

(Back to top)

Description:

This tsl has been replaced by the hsbPanelLapJoint.
This tsl creates a lapjoint connection between two floor/Roof panels.


Insert: Manually insert

This tsl has to be added in Model space.
Select the first panel and then the second.

Remarks:

Work flow:



hsbPolylineBeamcut

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL   

Description:

This tsl creates segemented beamcuts along a polyline or define points.


Insert: Manually insert

This tsl has to be added in Model space.
Draw a polyline in the panel where you want the cut to be placed.
Select the tsl then the panel and then the polyline.

Remarks:

Work flow:





hsbSolid2Panel

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl

Description:

This tsl converts a given 3DSolid into an hsbPanel.
When inserted the user flip, rotate and reassign the panel direction. Also the common text fields can be set by selecting a Text in hsbCAD.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsbSolid2PanelConversion

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl  

Description:

This TSL converts solids into hsbPanels under respect of typical CLT requirements.

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



PanelPosNum (Removed)

(Back to top)

Description:

This tsl displays the Sip PosNr. in the shopdraw

Insert: Manually insert

This tsl has to be added in Model space.

Remarks:

Work flow:



SIP_Element_Dimensions_PS

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT  

Description:

This tsl places dimension lines around an element. Several parts of the element can be dimensioned.

Insert: Manually insert

This tsl has to be added in Paper space.

Remarks:

Work flow:



SIP_Roof_Dimensions_PS (Removed)

(Back to top)

Description:

This tsl dimensions splays the Sip PosNr. in the shopdraw.

Insert: Manually insert

This tsl has to be added in Paper space.

Remarks:

Work flow:



Feedback and Knowledge Base