TSL | Content \ Dutch \ TSL \ (W)all

JS: Sept 2017 Author

Description:

tsl is the abbreviation for Tool Script Language and is a programming language.
With the help of this programming language, you can program dynamic connection/tools (e.g. metal parts) and other dynamic applications.
When our standard tsl's are updated this will be updated in the hsbContentDutch.

Location:

These are saved in your C:\Program Files\hsbcad\hsbcad20...\Content\Dutch folder.

Explanation:

The Dutch tsl's are divided into different categories.

TSL | Content \ Dutch \ TSL \ (D)imensioning

TSL | Content \ Dutch \ TSL \ (E)Element
TSL | Content \ Dutch \ TSL \ (F)loor

TSL | Content \ Dutch \ TSL \ (G)General

TSL | Content \ Dutch \ TSL \ (I)nformation

TSL | Content \ Dutch \ TSL \ (L)og

TSL | Content \ Dutch \ TSL \ (P)anel-CLT
 
TSL | Content \ Dutch \ TSL \ (R)oof

TSL | Content \ Dutch \ TSL \ (S)ip

TSL | Content \ Dutch \ TSL \ (T)imber

TSL | Content \ Dutch \ TSL \ (W)all
TSL | Content \ General \ TSL

hsb_Wall to Wall Connection: This tsl creates T-connections between two different Walls.
hsb_WallAngleFillet: This tsl creates fillet timbers between open angled Stickframe walls and assigns the fillets to their respective elements.
hsb_W-AnchorDistribution: Anchors on top/bottom left/right of walls. (NEW)
hsb_W-Blocking: This tsl places Blockings between beams or an Intergrated beam along multiple beams in a wall element.
hsb_W-CreateHeader: This tsl creates a header under the topplate. (NEW)
hsb_W-DistributeHorizontalSheeting: This tsl distributes the horizontal sheeting based on a distribution point.
hsb_W-DripRail: This tsl will put a drip rail above an opening.
hsb_W-Hatch: This tsl creates a hatch (opening) in a kneewall.
hsb_W-IntegrateHeader: This tsl adjusts the headers above openings and mills out the studs if necessary. ??
hsb_W-Integrate Timber: This tsl works with T-connections. It integrates the male beam in the female beam. ??
hsb_W-KneeWallCreator: NEW This is ....
hsb_W-Lifting: This is a combination tsl, the tsl makes use of the tsl hsbCenterOfGravity.
hsb_W-OpeningExtrusionProfiles: This tsl changes the beams used in the opening to the extrusion profile used for the studs in the wall.
hsb_W-OpeningInformation: This tsl adds opening information text to openings.
hsb_W-OpeningPositions: Shows opening position in outline. 
hsb_W-Post: This tsl creates a post (Extrusion profile) in an Element with the plates in certain zone.
hsb_W-ProfiledHeader: This tsl replaced the header beam with a predefined profile that is saved in your profile drawing.
hsb_W-Sanitary: This tsl creates a sanitary object.
hsb_W-ServiceHatch: This tsl adds a service hatch (opening) to wall elements.
hsb_W-SingleLifting: NEW This tsl creates lifting for a single beam.
hsb_W-SplitPlates: This tsl places splits to the headbinder, the top- and the bottomplate.
hsb_W-StudMarker: This tsl creates nail lines on specific zones.
hsb_W-WallConnections: This tsl adds tools to wall connections.
hsb-AngledBracing: This tsl adds angle braces in each corner of an Wall element.
How to insert Electricity
 

hsb_Wall to Wall Connection

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General

Description:

This tsl creates T-connections between two different Walls. U-Shape / L-Shape and multiple studs.  

 

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:





hsb_WallAngleFillet

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\UK\TSL\Standard\General  

Description:


This tsl creates fillet timbers between open angled Stickframe walls and assigns the fillets to their respective elements.


Insert: Manual insert

This tsl has to be added in Model space.
Insert the tsl, select the right info in the dialog box.
Select 2 Elements.

Remarks:

Work flow:




hsb_W-AnchorDistribution

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL    

Description:

This tsl places an Anchor distribution to an Element.


Insert: Manual insert

This tsl has to be added in Model space.
Enter the information in the dialog box that opens.
Select OK.
Select an Element, the anchors are places.

Remarks:

If you select the manual selection, the anchor positions have to be selected manually. The distribution parameters are not used.

Work flow:


hsb_W-Blocking

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL     

Description:

This tsl places Blockings between beams or an Intergrated beam along multiple beams in a wall element.
Adds a blocking or continues beam on a specified line in an element.


Insert: Manual insert

This tsl has to be added in Model space.
When inserting the tsl select an Element. Then a starting point and an End point.
The tsl will insert an instance of itself to each selected element.

Remarks:

Work flow:



hsb_W-CreateHeader

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL     

Description:

This tsl creates a header under the topplate.



Insert: Manual insert

This tsl has to be added in Model space.
Insert the TSL, enter the information in the dialog box that opens.
Select one or more Openings, the headers are created.

Remarks:


Work flow:



hsb_W-DistributeHorizontalSheeting

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL     

Description:

This is a combination tsl, the tsl makes use of the hsb_G-DistributionPoint.
This tsl distributes the horizontal sheeting based on a distribution point.


Insert: Manual insert

This tsl has to be added in Model space.
The hsb_G-DistributionPoint needs to be inserted first
Select a set of elements, or attach to element definition.

Remarks: English

The distribution point is found automatically.
The distribution point needs to be attached to the ElementFloorGroup.
Condition is that the zone you define in the Wall has to have Horizontale LapSiding.
If you don't use any values in the tsl, the values in the Wall definition will be taken in account.

Remarks: Dutch

Distribution point tsl moet aan de floor group van de elementen hangen.
Distribute horizontal sheeting kan aan de element definitie gekoppeld worden maar ook los geplaatst worden.
Voorwaarde is dat de betreffende zone al wel horizontal lap siding gedefinieerd moet hebben in de betreffende zone.
Als je geen distributie properties in de tsl invult zullen de waardes uit de zone (gedefinieerd in de wand) worden overgenomen.

Work flow:



hsb_W-DripRail

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL     

Description:

This tsl adds drip rail over the opening in the wall


Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_W-Hatch

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL     

Description:

This tsl creates a hatch (opening) in a kneewall.


Insert: Manual insert

This tsl has to be added in Model space. Can be inserted in plan&elevation view.

Remarks:

Work flow:

- Hatch:
- All hatches:
- Rotating hatch:
- Hatch on studs:
- Style:

hsb_W-IntegrateHeader

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL     

Description:

This tsl adjusts the headers above openings and mills out the studs if necessary.

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_W-Integrate Timber (Removed)

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL ???

Description:

This tsl works with T-connections. It integrates the male beam in the female beam.


Insert: 

This tsl has to be added in Model space.
This tsl is inserted automatically by hsb_W-Integrate Timbers.
Can be inserted manually

Remarks:

The tsl can be selected by the small marble shown in the center of the connection.

Work flow:



hsb_W-Integrate Timbers (Removed)

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  ???

Description:

This tsl inserts itself for each element in the selection set.
For each T-junction in the individual elements tsl hsb_W-Integrate Timber is inserted.
This tsl visualizes itself at the origin of the element. There its possible to trigger a recalculate.


Insert: Manual insert

This tsl has to be added in Model space.
To insert the tsl, one or more elements can be selected. The tsl will insert an instance of itself to each selected element.
he tsl can also be attached to the element definition. If its attached to the element definition it will be executed automatically when the element is generated.

Remarks:

This tsl currently only supports wall elements.
We also have a tsl the hsb_E-Intergrated Timbers.
We also have a tsl the hsb_T-Intergrated Timbers.

Work flow:



hsb_W-KneeWallCreator

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This is a ... 
   

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_W-Lifting

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This is a combination tsl, the tsl makes use of the tsl hsbCenterOfGravity.
This tsl adds lifting positions to a wall. Depending on the wall length this tsl inserts 1,2 or 4 lifting positions.
The positions can be modified through grippoints. The context menu provides functionality to rest the positions.
The positions are calculated with the center of gravity as reference point.
Place the hsbCenterOfGravity tsl first before using this tsl. (see Remarks)

    

Insert: Manual insert

This tsl has to be added in Model space.
To insert the tsl, one or more elements can be selected. The tsl will insert an instance of itself to each selected element.
The tsl can also be attached to the element definition. If its attached to the element definition it will be executed automatically when the element is generated.

Remarks:

Optional:
This tsl supports only walls. The tsl makes use of the tsl hsbCenterOfGravity. This tsl has to be located in one of the tsl search paths.
You also have to use the following file C:\hsbCompany\Abbund\hsbGenBeamDensityConfig.xml (this is needed to know the density of the materials)
We also have a tsl that lifts Roof elements, the hsb_R-Lifting.

Default rt cen is center of element, Better rt cen can be found though hsbCenterOfGravity

Work flow:



hsb_W-OpeningExtrusionProfiles

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  
  
Description:

This tsl changes the beams used in the opening to the extrusion profile used for the studs in the wall.

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Takes the first extrusion profile that it finds in the wall

Work flow:



hsb_W-OpeningInformation

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl adds opening information text to openings.


Insert: Manual insert

This tsl has to be added to a viewport (Paper space).

Remarks:

Work flow:



hsb_W-OpeningPositions

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl shows opening position in outline.


Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_W-Post

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl creates a post (Extrusion profile) in an Element with the plates in certain zone.


Insert: Manual insert

This tsl has to be added in Model space.
Insert the tsl, enter the information in the dialog box that opens. NOTE: Select a n extrusion profile
Select an Element and a position you want the extrusion profile to be.

Remarks:

Work flow:



hsb_W-ProfiledHeader

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl replaced the header beam with a predefined profile that is saved in your profile drawing.


Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_W-Sanitary

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl creates a sanitary object.

 

Insert: Manual insert

This tsl has to be added in Model space.
Insert the tsl, fill in all properties in the dialogbox that appears, select Ok, then select an Wall Element and the position.

Remarks:

Work flow:



hsb_W-ServiceHatch

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl adds a service hatch (opening) to wall elements.
Default locations are next to opening and at wall connections.

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb_W-SingleLifting

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl creates lifting for a single beam.


Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



 

hsb_W-SplitPlates

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl places splits to the headbinder, the top- and the bottomplate. Splitted beams are labelled from left to right A, B, .. F..


Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:

 

hsb_W-StudMarker

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl marks stud position on a specified zone of elements.


Insert: Manual insert

This tsl has to be added in Model space.
Insert the tsl, enter the information in the dialog that opens.
Select a set of elements.

Remarks:

This works only on Elements, Wall - Roof - Floor Elements 

Work flow:



hsb_W-WallConnections

(Back to top)

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20...>\Content\Dutch\TSL  

Description:

This tsl adds tools to wall connections.

Insert: Manual insert

This tsl has to be added in Model space.

Remarks:

Work flow:



hsb-AngledBracing (Removed)

(Back to top)

Description:

This tsl adds angle braces in each corner of an Wall element.


Insert: Manual insert/Element definition

This tsl has to be added in Model space.

Remarks:

Work flow:



How to insert Electricity

(Back to top)

We have different tsl that adds Electricity 

Feedback and Knowledge Base